26
2024
-
12
Xi'an Jiaotong University's Professor Yunfeng's team achieves new breakthroughs in the field of linearly polarized LEDs.
Nitride-based light-emitting diodes (LEDs) are widely used in lighting, display, and communication technologies. Notably, the linear polarization properties of these light sources represent a key functional enhancement, opening up entirely new application pathways in areas such as display backlights, 3D imaging, information encryption, and biomedical diagnostics. However, conventional LEDs grown by epitaxial deposition on c-plane sapphire substrates are typically regarded as non-polarized light sources with extremely low polarization extinction ratios (ER), making it challenging to meet the demands of advanced applications.
Research has found that integrating linearly polarized optical structures onto the surface of LEDs can enhance the ER by acting as mode-selective layers to extract the transverse magnetic (TM) mode, enabling polarized emission. However, since the transverse electric (TE) mode is either absorbed or reflected, this inevitably leads to an efficiency loss of at least 50%. This inherent trade-off between polarized emission and light-emitting efficiency poses a significant challenge to the development and practical application of linearly polarized LEDs.
Tackling this challenging issue, Professor Yunfeng’s team from the Advanced Optoelectronics Institute at the School of Electronic Science and Engineering, Department of Telecommunications, Xi’an Jiaotong University, has successfully introduced an innovative Ag/GaN metagrating structure featuring a loss-mode recovery mechanism. This breakthrough resolves the longstanding conflict between polarization and efficiency in linearly polarized LEDs, enabling simultaneous improvements in both light-emitting efficiency and polarization degree. The specially designed metagrating structure is fabricated using a low-cost laser interference lithography technique, which induces TE/TM mode conversion via birefringence while leveraging Bragg scattering to establish momentum compensation—facilitating the decoupled emission of the captured TM mode.
Building on this foundation, the team further integrated a mode-selection layer based on Al nanogratings, successfully demonstrating a blue linearly polarized Micro-LED fabricated from gallium nitride. This Micro-LED achieved an average polarization extinction ratio (ER) of 21.92 dB across a viewing angle range of ±60°. Compared to conventional Ag reflector designs, it boasts a 2.04-fold improvement in luminous efficiency and a 1.32-fold enhancement in ER. This groundbreaking research significantly reduces energy losses, effectively overcoming the efficiency bottleneck in polarized light-emitting devices—and paves the way for next-generation, high-efficiency, low-cost optoelectronic components with potential applications in areas such as information encryption, advanced displays, optical communications, and even medical technologies.


Performance of High-Efficiency Linearly Polarized Micro-LEDs
This achievement, titled "High-efficient and Linearly Polarized Light Emission of Micro-LED Integrated with Double-functioned Meta-grating," has been published in the prestigious international journal *Nano Letters*.
Professor Yunfeng, Professor Feng Li, and Associate Professor Zhenhuan Tian from the School of Electronic Engineering are the co-corresponding authors of the paper. Xi'an Jiaotong University serves as both the first-author institution and the sole corresponding-author institution. This research was supported by a project funded by the National Natural Science Foundation of China, while the characterization and testing procedures were carried out with assistance from researchers at Scientist Studio led by Dr. Chunlin Jia.